Italian - ItalyEnglish (United Kingdom)
HomeCompanyLocationRequest information


Ageing characteristic of lubricanting oils

The apparatus consists of a benchtop case hosting the heating block and a frame supporting the stirring mechanism. The block has a series of jackets for the sample containers: a turntable permits to assemble the sample containers before putting them in the jackets all together. The block can reach temperatures up to 150°C +/- 0.1°C: it is heated by means of a coaxial heater. The stirring device is actuated by means of an electronically piloted gear reduced motor connected to a cam: it is regulated for 25 rpm.

  • Enamel finished steel case with robust base to support the heating block.
  • Aluminium alloy machined circular heater with a series of jackets for sample tubes.
  • Water manifold with a series of hose connectors for condensers connection.
  • Water manifold for condenser sink.
  • Stroke mechanism that dips the copper coil in and out the oil under test 25 times per minute.
  • Adjustable stroke counter that stops the mechanism after the desired number of strokes.
  • Microprocessor controlled thermoregulator with PID action and built-in digital display 0.1 °C accuracy showing the temperature and the set-point. Four buttons easy-to-use keyboard to preset working temperature. Probe: Pt100 RTD. Regulation accuracy: ± 0.1°C.
  • Stainless steel heater.
  • Safety device that cuts off the power supply and light a lamp on the control panel in case of overheating of the heating block.
  • Easy access control box placed on the left side of the apparatus containing all the electronic and electrical components: anodized aluminium control panel with english written indications.
  • English written user manual.
  • For 220 V/50 Hz connections. Power consumption: 2500 W.
  • Dimensions (l x w x h): mm 550 x 550 x 1000 approx. Weight: 80 kg approx.
  • CE marked.
  • Without glassware and copper coils.

D51554-100         6 place apparatus

D51554-110         8 place apparatus

D51554-120         12 place apparatus



CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator




D51554-C00        Sample tube with female conic cut    

D51554-C01        Liebig condenser with male conic cut and two hose connectors for water inlet and outlet.


D51554-C02        Glass rod (copper coil support)       

D51554-C03        Copper coil



Specifications may vary without notice.


The apparatus is supplied bare without glassware (if any), accessories and consumables.

Ageing characteristic of lubricanting oils


Dott. Gianni Scavini di R. Scavini & C. snc
Via Donne della Resistenza, 26
28831 Baveno (VB) - Italy
Tel. +39 (0)323.924134
Fax +39 (0)323924935
Copyright 2012 - All Rights Reserved - Webdesign by Gragraphic