The apparatus, suitable for the execution of the test at 40, 50 and at 100°C, consists of a benchtop steel case containing a stainless steel bath with a four-hole cover to allow the introduction of the vessels or the test tubes and a control box containing all the electronics.
- Enamel finished steel case, benchtop model.
- Stainless steel bath equipped with a cover with holes for the insertion of the vessels or the test tubes; covers with hook for the vessels.
- Electric stirrer.
- Stainless steel auxiliary heater.
- Condensing bath cover that avoid steam leaks from the cover while the bath is used at 100°C.
- Control thermometer jacket on the bath cover.
- Microprocessor thermoregulator with PID action and built-in temperature display 0.1°C accuracy. Probe: PT100 RTD.
- Working range: from 30°C to 120°C. Regulation accuracy ± 0.1°C.
- Safety device against overheating and low-level.
- Easy access control box placed on the right side of the apparatus and containing all the electronics: anodized aluminium control panel with English written indications.
- English written user manual.
- For 220 V/50 Hz connections. Power consumption 2500 W.
- CE marked.
- Apparatus with support for multiple tubes also available.
- Dry baths also available: request related bulletin.
AD0130-100: Apparatus for four vessels with water bath. Dimensions (l x w x h): 640 x 400 x 600 mm. Weight: kg 40 approx.
AD0130-110: Apparatus for six vessels with water bath. Dimensions (l x w x h): 700 x 400 x 600 mm. Weight: kg 45 approx.
AD0130-120: Apparatus for eight vessels with water bath. Dimensions (l x w x h): 760 x 400 x 600 mm. Weight: kg 50 approx.
AD0130-300: Apparatus for four vessels with aluminium block.
AD0130-A00 Stainless steel corrosion test vessel
AD0130-A01 Test tube support (for 3 test tubes)
AD0130-A02 ASTM Copper Strip Corrosion Standards
AD0130-A03 Strip vise for one copper strip
AD0130-A04 Strip vise for four copper strips
CAL001 PT100 simulator
CAL002 Officially certified PT100 simulator
AD0130-C00 Glass test tube Æ 26
AD0130-C01 O-Ring for vessel
AD0130-C02 Copper strip 75 x 12.5 x 3 mm
AD0130-C03 Silicon carbide paper, 240 grit (pack of 12 sheets)
AD0130-C04 Silicon carbide paper, 150 grit (pack of 12 sheets)
AD0130-C05 Silicon carbide grains (0.5 Kg pack)
AD0130-C06 Viewing test tube
TA012C-N00 ASTM 12C thermometer (-20°C/+102°C)
Specifications may vary without notice.
The apparatus is supplied bare without glassware (if any), accessories and consumables.