- +39 (0)323 924134 - Fax +39 (0)323 924935
- info@scavini.com
Fuels, lubricants and engine coolants
Sale and production of equipment for Fuels, lubricants and engine coolants
The apparatus, suitable for the execution of the test at 40, 50 and at 100°C, consists of a benchtop steel case containing a stainless steel bath with a four-hole cover…
The apparatus consists of a floor mounted water bath with a support for three vapour pressure cylinders.
The apparatus, consists of a benchtop steel case containing a stainless steel bath: the cover has a series of holes suitable for both glassware for copper and silver strip corrosion…
The apparatus consists of a benchtop case which houses an aluminium heating block. Two versions are available: one for the “Air Jet” test on gasoline and one for both the…
The apparatus consists of a benchtop steel case containing a pyrex jar, 330 mm deep, that permits the use of a wide range of viscometer tubes. Up to six viscometer…
Rust preventing characteristics of inhibited mineral oil
Category:
Fuels, lubricants and engine coolants
The apparatus consists of a benchtop case containing a dry block heater or a stainless steel tank and a support for the stirrer motors. Each position is equipped with an…
The apparatus consists of a floor mounted water bath with a support for three vapour pressure cylinders.
Innovative equipment acc. to ASTM D1384 with solid block heating, touch-screen interface and mass-flow controllers that permit to maintain a constant air flow even in case of fluctuation of inlet…
The apparatus consists of a steel frame supporting the control box, the jar and an electric lift that permits to move the stirrer blade up and down in the test…
Rust protection by metal preservatives in the humidity cabinet
Category:
Fuels, lubricants and engine coolants
The apparatus consists of a floor mounted case containing a stainless steel tank and the rotating mechanism. A control box located on the right side contains all the electronics.
The apparatus consists of a benchtop steel case containing a stainless steel bath with a cover with up to eight jackets that allow the introduction of the vessels and a…
The apparatus consists of a base supporting one or two heat-transfer corrosion cells. Cells are rated for a working pressure up to 40 psi and working temperature up to 160…
The apparatus consists of a benchtop oven with a turntable inside that can carry four or eight 200 ml Coca-Cola bottles. The turntable rotates the bottles at 5 rpm.
The apparatus, suitable for the execution of the test at 50°C, consists of a steel case containing a stainless steel bath with a four-hole cover for the test tubes and…
The apparatus consists of a benchtop case hosting the heating block and a frame supporting the stirring mechanism. The block has a series of jackets for the sample containers: a…
The apparatus consists of a support hosting two filtering units. A unique mechanism permits to the operator to stay far from hot parts of the instrument during the operations to…
Products information
Request technical support
Petroleum Testing Apparatus for oil industry
Via Donne della Resistenza, 26
28831 - Baveno ( Verbania ) - ITALY
Tel. +39 (0)323.924134
Fax +39 (0)323 924935
i n f o @ s c a v i n i . c o m